Follow

How to configure your Philips 10BDL3051T or 10BDL4151T tablet for Pronestor display

This guide show you how to configure a Philips 10BDL3051T or 10BDL4151T tablet for Pronestor display.

Table of contents

Requirements

  • A Pronestor Display solution, version 6.0.7 or newer
  • USB stick
  • Physical access to the Philips 10BDL3051T or 10BDL4151T tablet
  • Your Pronestor Display Url

Introducing your Philips tablet

Front:

philipsfront.PNG

Back:

Notice the hightligtet buttons. Button 1 is the action button, button 2 is the volume control.

 

Check the firmware version

This is only relevant for 10BDL3051T. If you have a 10BDL4151T, please go to Factory reset - must ALWAYS be done

Pronestor Display only supports firmware version 3.05 for 10BDL3051T 

  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "About" and check the build number

If the build number is 3.05, go to the chapter Factory reset - must ALWAYS be done

If the build number is different from 3.05 you need to update or downgrade the firmware to 3.05

 

How to update the firmware

  • Download http://help.pronestor.com/download/philips_update_v305.zip
  • Rename it to update.zip
  • Copy update.zip to a usb stick
  • Connect the usb stick to your Philips display
  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "About"
  • Click "System updates"
  • Click "Local update"
  • Click on the path for "update.zip"

Your device will now install the upgrade and reboot. This will take a few minutes.

 

Factory reset - must ALWAYS be done

A factory reset is essential. When you unbox the tablet, it isn't factory reset. Most of the bugs we get, are because the device haven't had a factory reset. Save yourself a lot of trouble and get it done while you set it up.

Factory reset will delete all files on the device. Please backup anything you need to save first.

  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "System Tools"
  • Click "Factory Reset"
  • Click "Factory Reset"

Your device will now reset and reboot. This will take a few minutes.

 

Installing the Pronestor Kioskbrowser

  • Download the latest kioskbrowser here Link
  • Copy it to a USB stick
  • Insert the usb into your Philips tablet
  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Apps"mceclip0.png
  • Click "File Manager"mceclip1.png
  • Browse to where you put the file on the USB stick. Root is "mnt/usb_storage/"
  • Select the .apk file and press "Open"mceclip2.png
  • Follow the install instructions

Configuring the Pronestor Kioskbrowser

How to set the Pronestor Kioskbrowser as the startup app.

  • Hit the back button until the file manager is closed, or press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "Signage Display"
    mceclip3.png
  • Scroll down untill you see "Custom App"
  • Click "Custom App"
    mceclip4.png
  • Click "Select App"
    mceclip5.png
  • Click "KIOSK"
  • Click "Save"
    mceclip6.png
  • Hit the back button until you're back to start, or press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "Signage Display"
    mceclip3.png
  • Click "Boot on source"
    mceclip8.png
  • Click "Input"
    mceclip9.png
  • Click "Custom App"
    mceclip10.png

How to remove the bottom navigation bar

  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Settings"
  • Click "System Tools"
  • Under "Navigation bar" click the cirle at "Disable"
    mceclip0.png

How to configure the Pronestor Kioskbrowser to point towards your Pronestor Display

  • Press the action button and the volume control to access the settings area. You will be asked for a password. The default is 1234
  • Click "Apps"mceclip0.png
  • Click "KIOSK"
    mceclip14.png
  • Click and hold at the lower right corner for about 4 seconds. You will know that you got the right point when you see a grey square. You will be asked for a password. The default is "1234"mceclip15.png
  • Click "URL"
    mceclip16.png
  • Insert your Pronestor Display Url for this tablets room and click "OK".
    In this example it's https://pronestor.pronestordisplay.com/Display.mvc/Show/12 but check that the link is for your site and the correct meeting room.
    mceclip18.png
  • Click "Go to url"
    mceclip19.png
  • Click "ok" to the reminder

Your Pronestor Display is now ready for use.

 

Setting up TeamViewer for Centralized Device Management

Prerequisites: Firmware version FB02.05 (or newer), TeamViewer 12 (or newer)

The FB02.05 firmware version for Philips 10BDL3051T comes with a native TeamViewer Host application. This can be used for setting up centralized device management.

Please note that the following is merely a suggestion on how it can be implemented - Pronestor does not provide support in third-party software. Please refer to your hardware provider for a setup guide.

  • On the device, open the "Host" application from the home screen.
  • In the "Assign" tab, input credentials for a TeamViewer account with an active license and click "Assign".
  • An email will be sent to the email address related to the TeamViewer account with verification details.
  • Once verified, the device will be available for remote control from the TeamViewer account
    teamviewer.PNG
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk